Commercial Flake Epoxy.
Decorative flake systems for retail floors, gyms, locker rooms, and shop bays. Slip-resistant, easy-clean.
- Service
- Commercial Flake Epoxy
- Coverage
- ~100 mi · Miami → West Palm
- Walk-on
- 24 hours after final coat
- Drive-on
- 48 hours after final coat
- Lead time
- Same-week walkthrough
- Quote
- (786) 488-5057
What sets a Suncrete commercial flake epoxy install apart.
Most commercial flake epoxy failures trace back to the same handful of compromises. We don’t bend on these, even if it costs us a job.
Slip-resistant by design
Chip surface creates built-in texture. Code-compliant for wet areas.
Hose-down rated
Sealed topcoat handles pressure-washing and chemical cleaning. No grout lines to scrub.
30+ blend palettes
Pre-mixed blends for retail aesthetics or custom blends to match brand colors.
The longer answer on commercial flake epoxy.
Decorative flake systems for retail floors, gyms, locker rooms, and shop bays. Slip-resistant, easy-clean. That’s the one-line version. The longer answer is that commercial flake epoxy is one of sixteen coating systems we install across South Florida, and the only reason it ends up on your slab is because the walkthrough determined nothing else would last as long. Wrong-system installs fail at year 2 even with perfect prep. The most expensive floor anyone ever buys is the one that needs to come out and be redone in three years.
Commercial installs are about downtime tolerance as much as they’re about chemistry. We size the system to your traffic volume, chemical exposure, and the realistic window you can lose for prep + cure. Most jobs run Friday evening through Sunday so you’re operational Monday morning. We bring our own generator, lighting, HEPA-shrouded grinders, and dust extraction so the work doesn’t disrupt neighboring tenants or contaminate sensitive equipment in adjacent spaces.
Lifespan on a properly-installed commercial flake epoxy in a commercial setting runs 8-15 years depending on traffic volume and chemical exposure. The variable is always abrasion at high-traffic zones, door thresholds, forklift turnaround points, near floor drains, which we typically address with a sacrificial topcoat refresh every 5-7 years rather than a full re-coat. That’s planned maintenance, not failure.
Common commercial flake epoxy applications.
Most-requested project types where this system makes sense. We don’t push it into the wrong context, if your job doesn’t fit any of these, the walkthrough will tell us a different system is the right call.
Forklift-traffic warehouses
Forklift-rated builds (15-30 mil total) handle constant pallet-jack and forklift traffic without indenting or chipping at thresholds. Most-requested in Doral, Miami Gardens, and Hialeah industrial corridors.
Commercial gyms and fitness
Resilient enough to survive dropped dumbbells (within reason) and easy to clean between member sessions. Free-weight zones typically get an extra topcoat layer for impact resistance.
Auto shops + dealerships
Oil + solvent resistance is built into the system. Hot-tire marks rare. Showroom-floor finish available for retail spaces, industrial finish for back-of-house service bays.
Food-service prep + back-of-house
Health-code-rated topcoat. Hose-down ready. Anti-microbial sealer available for prep rooms, dishwashing zones, and storage. Urethane cement system available for the cookline where heat resistance matters.
What a Suncrete commercial flake epoxy install looks like.
Walkthrough
Free, on-site. Moisture meter, photo set, scope confirmation. Same-week.
Prep day
Diamond-grind to CSP profile. Crack chase. Vacuum. Moisture re-test.
Coating
Basecoat → broadcast/decorative → topcoat. Single-day pour for most installs.
Cure + handoff
Walk-on 24h · drive-on 48h. 30-day inspection visit included.
Other Suncrete coating systems.
Sixteen total in our kit. The right system depends on the slab + use case, we won’t force-fit commercial flake epoxy if a different system will outlast it.
What people ask us most.
Is it gym-floor-rated?
Yes. Resilient enough to drop dumbbells on (within reason). For free-weight zones we add an extra topcoat layer.
How easy is it to clean?
Daily: dust-mop and damp-mop. Weekly: degreaser as needed. No waxing required. Sealed for the life of the floor.
Does it work in commercial kitchens?
We typically recommend Urethane cement for kitchens because of cove-base molding. Flake works in prep rooms and storage.
Got a slab? Let’s pour it right.
Photo + square footage = a real quote in 24 hours. No “starting at” pricing, no upsells. Commercial Flake Epoxy installs across Miami-Dade, Broward, and Palm Beach.